News

Operating instructions for pipe threading lathes
by admin on 23-02-07
A. Check before driving 1, according to the machine tool lubrication chart filled with suitable lubricating grease. 2, check the electrical facilities of each department, handle, transmission parts, protection, limit device complete and reliable, flexible. 3, each gear should be in the zero posit...
Read more
Analysis of common faults of slant-bed CNC lathe and handling methods
by admin on 23-02-06
Slant bed CNC lathe, the plane where the two guide rails are located intersects with the ground plane and becomes an inclined plane, the angle is 30°, 45°, 60°, 75°, and the bed is a right triangle. The cross-sectional area of the machine is larger than that of a flat bed with the same specificat...
Read more
How much do you know about those essential inspection work of CNC slant bed lathe?
by admin on 23-02-03
For any machinery and equipment, in order to give full play to its advantages in the process of using it, not only should we pay attention to the ways and means in the process of operation, but also should do the corresponding inspection and preparation work before using the machinery and equipme...
Read more
Do you know the cause and solution of the pipe threading lathe tool holder keeps turning?
by admin on 23-02-02
Pipe threading lathe is a kind of horizontal lathe designed for turning and processing large diameter pipe fittings, featuring a large spindle through-hole diameter (generally 135mm or more) and a chuck at the front and rear of the spindle box, so as to facilitate the clamping and processing of l...
Read more
Do you know what preparatory work needs to be done before setting up a CNC slant-bed machine?
by admin on 23-02-01
The CNC slant bed machine is a two-axis linkage semi-closed-loop full-function CNC machine, based on contemporary advanced design and manufacturing technology, implementing the latest national accuracy standards and our factory’s rigidity standards, equipped with domestic and foreign advanc...
Read more
What do you think about the environmental requirements for pipe threading lathes?
by admin on 23-01-31
Pipe threading lathe consists of three series:Firstly, horizontal lathe with processing diameter Φ400-1600mm and length 750-10000mm, secondly, pipe threading lathe with spindle aperture Φ130-440mm, and thirdly, various big hole lathes, big head lathes and machine tools with spindle aperture Φ130-...
Read more
What are the four main performance characteristics of an ordinary pipe threading lathe?
by admin on 23-01-30
The common pipe thread lathe, also known as pipe threading lathe, is a horizontal lathe designed for turning and processing large diameter pipe fittings, featuring a large spindle through-hole aperture (generally 135mm or more) and chucks at the front and rear of the spindle box, so as to facilit...
Read more
Do you know the four main performance characteristics of pipe threading lathes?
by admin on 23-01-12
Pipe threading lathe, consists of three series:one is horizontal lathe for processing diameter Φ400-1600mm and length 750-10000mm, the second is pipe threading lathe with spindle aperture Φ130-440mm, and the third is various big hole lathe, big head lathe and machine tool with spindle aperture Φ1...
Read more
The right (machine) tool for the job | Modern machine shop
by admin on 23-01-12
This high-volume shop produces parts on both mechanical and Swiss CNC machines, but which machine is right for which job? #workforce development The first sign that Precision Plus is different from other machine shops is a slight click. The sound comes from a dozen mechanically operated Swiss-typ...
Read more
CNC pipe threading lathe daily maintenance precautions
by admin on 23-01-09
The CNC pipe threading lathe is a specialised machine tool for pipe processing, designed and manufactured for the processing requirements of oil pipelines, casing and drill pipes in the petroleum, chemical and metallurgical industries, mainly used for processing internal and external pipe threads...
Read more
Comparison of the advantages of CNC lathes and conventional lathes
by admin on 23-01-09
The advantages of CNC lathes and conventional lathes are compared mainly as follows. 1、Accuracy advantage Conventional lathes rely on gears and common screw-nut transmission. Due to the existence of gaps between each moving vice and the inaccuracy of manual operation, the repeat accuracy...
Read more
Analysis of the causes and solutions of instability in the machining operation of pipe threading lathes
by admin on 23-01-09
When a pipe threading lathe is processing a workpiece, problems will inevitably arise, and when it encounters faults, I’m sure we are all very annoyed. Today, we will analyze the causes and solutions of instability during processing operation for your reference! 1、In mass production, the w...
Read more

<< < Previous 6 7 8 9 10 11 Next > >> Page 8 / 11